Introduction: Knex R700

Picture of Knex R700

my knex R700 has fair power accuracy and range, i think it looks quite like the real R700 sniper rifle over all it is a very effective sniping knex gun it is also fairly reliable since i have changed my firing mechanism. I think i better add so i dont upset anyone else that apparently the real name of the gun is M700 DO NOT TELL ME THIS IS THE WRONG NAME as some guns have multiple names


JulianC25 (author)2015-11-03

I'm stupid apparently it means model. (Damn you wikipedia

sharpbike123 (author)2012-04-13

Is it very flimsy

pinderfish (author)sharpbike1232012-04-15

fairly, although, you can put rods inside, and you can also change the white rods over too the blue rods too make it thicker, and that makes it much much stronger and if you do both at the same time it is really very strong, but for a knex gun a bit weighty, but then thats nothing if you compare that too the real one, and I prefer a weighty gun

Smasher555 (author)2011-03-10


pinderfish (author)Smasher5552011-03-11

and how may i ask is it wrong

Smasher555 (author)pinderfish2011-03-11

1. It's called the M700 (who gives a crap, I do).
2. The handle is oddly shaped unlike the real one.
3. And... The barrel to long after the stock.

War Hawk One (author)Smasher5552011-04-02

dude I've seen your comments on a few ables and you don't post any nice comments. I also have a few things for you to know:
1. don't comment other people if you haven't made any ables.
2. it's not an M700 but an R700 because it's made by Remington.
3. if you keep posting offending comments, people will do it back at you.
4. start making your own stuff and stop criticising this guy.
5. be brave and go to Pinderfish and say this in front of his face

Smasher555 (author)War Hawk One2011-04-05

"M" stands for Model, Remington Model 700. And a while back I said I don't have a camara to post the four guns I've built. I built an AW .338, an M14, Socom M14 (basically the same gun, but I made two Q.D. front sets), an M1 Garand, and a BAR (Browning Automatic Rifle). And by the way, the rifle is called an M700, you and pinderfish (sweet name btw) think it's ONLY called the R700 because you know from CoD MW... Which the game is great in campaign.

Annix15 (author)Smasher5552012-01-05

Why don't you just buy a camera

qwerty403 (author)Smasher5552011-08-28

i agree about cod but no nothing about real guns so....

War Hawk One (author)Smasher5552011-04-07

owkey you can be right about the remington thing but I still don't believe that you posted those four guns. I would love to see them but now I still can't be sure srry. =(

Smasher555 (author)War Hawk One2011-04-10

Who ever said I posted them? I built them but I haven't posted them because I dont have a camera.

War Hawk One (author)Smasher5552011-04-11

oke i meen that I just can't believe that you MADE them if you don't have pics so that's why and don't tell me you don't have a camera because I've read that already =)

Smasher555 (author)War Hawk One2011-04-17

I wish I could post then... I based them off of airsoft guns. I can atleast tell how they turned out though. The M14 shoots, but not very hot. The BAR is a non-shooter. The M1 Garand shoots an 8 round internal magazine which I am trying to make itself eject on it's own. The AW .338 shoots perfertly and build quality is at it's best. It can a good 100 feet and almost hit my skinny friends.

pinderfish (author)War Hawk One2011-04-18

actualy i found out that r700 means remington 700 and m700 is model 700 so all of us were correct but thanks for sticking up for me, your awsome man

I personally think it is an R700, cause it was made by Remmington, wich explains the R in R700, the full name is Remmington model 700

pinderfish (author)Smasher5552011-03-14

blame knex gun builder as its original title was knex m24 and the handle doesent look unlike the real M24. actually at the end pic (the real gun) it still says M24 which i need to change. do you know of any good semi auto mechanisms?

Smasher555 (author)pinderfish2011-03-14

No I don't know how to build a semi-auto mechanism.

pinderfish (author)Smasher5552011-03-15

well thats annoying

Nazikiller2.0 (author)2011-11-10

were did you get the design?

pinderfish (author)Nazikiller2.02011-11-10

my brain....... that gun that you see is one of a kind, as there are no designs for it on the internet, unless someone has gone behind my back and made it then posted designs! it is my favourite knex gun I have ever made though, so this time if you want me to, I will post an instructable on how to build it

headshothoncho (author)2011-03-06

ik looks skinny o.0

it is skinny its meant to be light weight

ok, just noticing because the real gun is not so skinny :P

i know but when i made it that wide it was doing something to the trigger and it was harder to run with

beanieostrich (author)2011-02-23

That gun is EPIK!!! It looks like a R700, whats the power and range? 5*

pinderfish (author)beanieostrich2011-03-01

my gardens 42ft and then theres a fence so im not realy sure, sorry! and thanks for 5 stars

beanieostrich (author)pinderfish2011-03-01

I test the range of my guns in the driveway, roughly 85 ft.

pinderfish (author)beanieostrich2011-03-01

i could test it in the road by the way the scope isnt the sight

beanieostrich (author)pinderfish2011-03-01

So the scope is for looks? I think the gun should shoot about 80 ft the way it looks. Make sure you angle it slightly to get maximum range.

pinderfish (author)beanieostrich2011-03-03

should i add fins on the round or not

beanieostrich (author)pinderfish2011-03-03

Of how small the barrel is, you probably shouldnt add fins to the ammo. It would jam up the gun most likely. The barrel looks like it has a lot of friction.

pinderfish (author)beanieostrich2011-03-05

the round is fired from the top of the gun so it does not touch the barrel meaning there is no friction thats why i make slingshot mechanisms

beanieostrich (author)pinderfish2011-03-05

I didnt know that it was a slingshot gun.

pinderfish (author)beanieostrich2011-03-06

yes but now i am modding it to be an l96a1

~KGB~ (author)2011-02-21

looks like an r700

pinderfish (author)~KGB~2011-02-21

i know and i wasnt sure but i have seen an m24 in real life so i went with the one i have seen

~KGB~ (author)pinderfish2011-02-21


pinderfish (author)~KGB~2011-02-21

should i change it to an R700

~KGB~ (author)pinderfish2011-02-21

well it looks identical, so yes

pinderfish (author)~KGB~2011-02-21

ok then

~KGB~ (author)pinderfish2011-02-21


pinderfish (author)~KGB~2011-02-21

what does that mean?

~KGB~ (author)pinderfish2011-02-21


altair ibn la ahad (author)2011-02-18

found it

ah thanks you found it i thought it had been unpublished why does it say nothing is related to it

probably a glitch in the system

About This Instructable




More by pinderfish:knex FN FALknex l96a1knex R700
Add instructable to: