Knex Mechanical Hand

6,067

4

20

Posted

Introduction: Knex Mechanical Hand

with this handy device you can reach things that are out of reach. This is what you need:

rods:4 green, 20 white, 4 blue, 4 yellow, 1 grey
conectors:1 brown, 10 grey, 16 orange, 8 red, 2 white
other:10 grey spacers

Step 1: The Joints and Fingers

picture 1 & 2:make 4 of these
picture 3:connect them like this
picture 4:add the yellow rods like this

Step 2: Making the Handle

picture 1:build this
picture 2:build 4 of these
picture 3:connect them like this

Step 3: Connecting It All Together

connect everything together like this and thats it you can work it by moving the bottom white connector up and down the handle

Share

    Recommendations

    • Science of Cooking

      Science of Cooking
    • Microcontroller Contest

      Microcontroller Contest
    • Spotless Contest

      Spotless Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    20 Comments

    i like it. could someone post a mechanical hand (>'.')>

    I,m sitting here right now with one i created

    It gets jammed to much. Maybe make the whites blues.

    nice claw. i gonna turn it into a mekanical hand

    nice job. and the best part... IT ACTUALLY WORKS!!!!!!!!!

    ITS NOT THE BEST. BUT IF YOU TWIQUED IT IT COULD BECOME THE MOST POWERFULL CLAW TO MAN-KIND

    twiqued? you mean tweaked!?

    =claw machine you could you it as a claw machine ill make one ill try to post.

    Very good design indeed, I made a mode (more of an extention) to this. Should I post?