loading
Picture of knex micro uzi
this is one of the best micro uzi's I've seen on the site because of it looks and it's size.
al the other uzi's where big or didn't look like a micro uzi. I don't know how far it shoots but it isn't to far because i only use 3 little rubberbands.

a few pro's and cons

pros

it looks like a real micro uzi
it doesn't need much parts
you don't have to cut in parts

cons

it isn't really strong(the barrel is ripped apart sometimes)
it doesn't shoot so far

i think i can be proud of my first instructable and gun!!!

PS. I'LL UPDATE THE MAIN IMAGE SOON BUT THIS ONE IS TOOKEN BY MY WEBCAM.
 
Remove these adsRemove these ads by Signing Up

Step 1: What you need

Picture of what you need
DSC06072.JPG
blue-connectorpart.jpg
you'll need:

a few rubberbands
a pair of scissors
tape (I prefer ducttape)
and the parts on the 3 pictures

Step 2: The gun handle and sides

Picture of the gun handle and sides
DSC06075.JPG
DSC06076.JPG
DSC06077.JPG
DSC06078.JPG
DSC06079.JPG
pic 1&2 built these 2 sidepanels and the other 4 panels.

pic 3 then built the two innerpanels.

pic 4 attach the panels with a blue rod with two beige connectors. put one in the other hole too.

pic 5 attach the innerpannels with the two blue rods and put in a blue rod on the front as showed.

pic 6 overview till now

Step 3: The barrel

pic 1&2 this is the first part of the barrel. you have to do it with these two pictures.

pic 3 put the barrel in the back of the gun

pic 4&5 wrap this together with some tape and cut out the holes. then turn the y connector and put this piece on as shown. then turn the barrel back in the gun.

Step 4: The true trigger

Picture of the true trigger
triggerhelp.jpg
triggerhelpwheretoput.jpg
putinbluerod.jpg
pic 1 this is the trigger i stole it from the glock 23 from ironman but you dont have to cut of the rods! :) !

pic 2 this part is to prevent falling out the trigger.

Step 5: The ram

Picture of the ram
Picture 26.jpg
Picture 31.jpg
make this ram and wrap some tape around it so it doesnt break down when you shoot.

Step 6: The rubberbands

Picture of the rubberbands
Picture 28.jpg
Picture 29.jpg
Picture 30.jpg
this is where to put the rubberbands

Step 7: Finish

Picture of finish
I HOPE U LIKE IT AND PLEASE RATE AND SUBSCRIBE
hey on step two what is that black piece?
nilsepils (author)  2000smartkid4 years ago
Can you say wich picture on wich step (this is actually the third step on the tutorial so i dont know if you mean this one or the 2nd)

thx
kmanv34 years ago
ammo?
nilsepils (author)  kmanv34 years ago
Just muzzle loaded so put it in in the front :D
Intrusion5 years ago
i need bou more brick i havent yellow/grey niples and green/black roods <lol2>
stevenh4295 years ago
i was going to ask, is it semi auto or auto... lol neather
stevenh4295 years ago
yep
brammeke115 years ago
That lengtened barrel =Þ
DJ Radio5 years ago
does this gun have a mag or do you muzzle load it?
nilsepils (author)  DJ Radio5 years ago
yeah it is muzzle loaded but this is only my first gun so I think its pretty cool
muzzle
Figures.