a mobile phone, etc. the safety system stops the 'shockwave' that
is generated if the holder falls on the ground, protecting the electronic device from any harm.
you will need:
8 red rods 16 purple connectors
4 yellow rods 8 red connectors
22 blue rods 2 white connectors (snowflakes)
24 white rods 8 yellow connectors
2 little black connectors
8 small rubber bands
and 11 grey connectors (you can use others, they just need to be small)
i don't care what you say, though this is my first instructable.
have fun building!
Remove these ads by
Signing UpStep 1The central holder
1: the finished C. holder
2: make this first, it's the top
3: the bottom of it
4 add the rubber bands
5: put the two together
6: make these ( the connector on the top can be everything thats small)
7:add them like this
8 and 9:turn upside-down, should look like picture 8, then place small connectors on the top (9). turn it again upside-up
done!
| « Previous Step | Download PDFView All Steps | Next Step » |

















































Second: yes, it is more fun. Nothing beats handling dangerous chemicals for fun...At least, it does for me.
Wow, that's an unexpected reply! I've never seen anyone say something like "HOW? ARE YOU K-R-A-Z-Y?",
and then something mature as "different people like different stuff."
congratulations, you got me amazed!
i like it cause i have one lol =P