ok people. i hope you like this ible, its my first full instructions ible. WARNING!!! USES SEVERAL CUT PIECES!!!
this gun also uses quite alot of pieces.
If you make this gun. ill post in the intro.
Im also requesting someone make in metallics cuz i dont have that much for the hole gun. probably enough for the fake barrel.
credits to owen-mon82397 for the handle slant
Like what I make? SUBSCRIBE
pros:
SEXY(unless you otherwise disagree)
Right size
Cons:
may jam a little
could use some work
this gun also uses quite alot of pieces.
If you make this gun. ill post in the intro.
Im also requesting someone make in metallics cuz i dont have that much for the hole gun. probably enough for the fake barrel.
credits to owen-mon82397 for the handle slant
Like what I make? SUBSCRIBE
pros:
SEXY(unless you otherwise disagree)
Right size
Cons:
may jam a little
could use some work
Remove these ads by
Signing Up
Visit Our Store »
Go Pro Today »
I try to finish a gun in one day so that would kill my schedule so.......
-SW
becouse the stock is to long (fixed it myself)
Green rods – 279
White rods – 119
Blue rods – 45
Yellow rods – 0
Red rods – 1
Grey rods – 2
Black rods - 1
Connectors:
d.grey – 32
l.grey – 17
red – 49
green – 4
yellow – 109
orange – 98
white- 22
misc:
ball connector – 2
ball socket - 1
tan clip - 4
blue clip – 4
y clip – 21
y clip with 1 tab missing – 2
white rod with no ends – 3
total: 815!
Green rods – 279
White rods – 119
Blue rods – 45
Yellow rods – 0
Red rods – 1
Grey rods – 2
Black rods - 1
Connectors:
d.grey – 32
l.grey – 17
red – 49
green – 4
yellow – 109
orange – 98
white- 22
misc:
ball connector – 2
ball socket - 1
tan clip - 4
blue clip – 4
y clip – 21
y clip with 1 tab missing – 2
white rod with no ends – 3
total: 815!