Introduction: Knex Crossbow

Picture of Knex Crossbow

I am going to build my crossbow but before that i will show u my 5 favorite guns.............

these are my 5 favorite guns-well the only 5 guns i have right now

my favorite frome 1-5

first pic-all of my guns

#1-handgun with extended clip-30rounds-not my gun designs

#2-another handgun with extended clip-16rounds-not my gun designs

#3-1 shot crossbow-my gun designs

#4-1 shot plasma pistle- my gun designs

#5-mini handgun-7 rounds- not my gun designs

Step 1: My Crossbow

Picture of My Crossbow

this is my crossbow

pic 1-the loaded crossbow

pic 2-the crossbow

this crossbow is compleatly my design, thats why the trigger system is kind of bad but it works and can hold alot of rubber bands

this crossbow shots about 35-50 feet with 6 elastic bands
it has alot of power and super good aim

Step 2: Building the Trigger

Picture of Building the Trigger

this is the trigger system it is supper easy

pic #1- get these peices

pic #2- get these to

pic #3- get these peices from pic #1 and attach them, save the pecies from pic #2 couse u will use them later

Step 3: Handle

Picture of Handle

build this

1-build

2-different veiw

Step 4: Body of Crossbow

Picture of Body of Crossbow

this is the body

pic 1-side veiw

pic 2-other side

pic 3-top veiw

pic 4-under veiw

Step 5: The Bow

Picture of The Bow

this is the bow-i know it takes alot of spacers but the only reson for that is so when u pull it back/bend it, it give it a good bend and it is springy

pic #1-peices u will need

pic #2-top veiw

pic #3-side veiw

pic #4-arm of bow

pic #5-under veiw

Step 6: Attatch the Peices

Picture of Attatch the Peices

get all of the peices

pic1-all of the peices

pic2-attatch the trigger

pic3-under veiw of the trigger attatched

pic4-attatch the handle and hand gaurd

pic5-remove the peice on the frount or the body and the peice on the bow

pic6-put the gray rod from the bow onto the body and reatach the peice from the body

pic7-get the bow

piv8-attatch the bow

pic9-it should look like that

you are now done!!!

Step 7: Attatch the Elastics

Picture of Attatch the Elastics

pic 1-the elastics u will need

pic 2-attatch the elastics on the frount of the gun

pic 3-attatch the elastic onto the trigger

Step 8: Bullets/loadind/fireing

Picture of Bullets/loadind/fireing

this is how to load/fire the gun

pic #1-this is the bullet

pic #2- but the bullet on the yellow rod

pic #3-pull the elastics back and put onto the back of the yellow connector

pic #4-the bow should be bending like this

pic #5-there is the bow

pic #6-that is from 12 feet

pic #7-that is from 1 foot

Comments

jashaszun (author)2009-05-07

The plasma pistol isn't your design! You just barely modded the Desert Buzzard knex pistol!

ethster11 (author)2009-05-03

oh soz well done!!!!

ethster11 (author)2009-05-03

i think that overall 6/10 because it was really hard to understand but it worked well once you workk out who to use the trigger!!!!!

ajleece (author)2009-04-14

This is pretty much mine crossbow without the stock.

charlie farthing (author)2009-04-06

im looking at your triger and i wunt to no if iit can take estrem tencion

yes quite abit

mthiels (author)2009-03-21

very good design, also very powerful, good job!

The Jamalam (author)2008-12-24

and its all very well saying not my designs, but i think these people deserve credit

they dont evan care they are happy that there gun is on my top 5 list

knexguy (author)nickkoppelaar2008-12-28

Are you really conceited enough to think that people would give a damn that their gun was on your favourites list?

The Jamalam (author)knexguy2009-03-01

nice one :P

knexguy (author)The Jamalam2009-03-01

:)

how do you know? some people will not know what they are! And why won't you give them credit! Its all very well saying this is not my design, but who's design is it?

not know what they are ??? ther a freekin knex guns

whos they are

and how do u know

i never said i did, i said it was likely

and besides, the licenses on those guns are non-commercial share alike, so you can republish the ideas, and i directly quote, as long as you give them credit for their ideas

juneapaluna (author)2009-01-01

Looks lightweight and simple, which I like.

ty, atleast one nice coment

The Jamalam (author)2008-12-24

ur crossbow is dsmans minus the stock

mine dosent look andthing like his and if u ask me i think mine looks better

Seriously? youthink a weedly thin crossbow without a stock but with almost exactly the same framework but thinner is better than dsman's?

yeah almost the same but uh not evan, and it dosent have to be thick to kick dsmans @$$

btw ur names should be nick+copydsmansxbow

pls (author)RMConstruction2008-12-27

Theres not to much thats the same..

I_am_Canadian (author)2008-12-23

My spiffy! Yay!

Der Bradly (author)I_am_Canadian2008-12-23

lol

nickkoppelaar (author)Der Bradly2008-12-23

lol......what???

lol from me at you thinking the xbow can beat dsmans XD

yeah that is my favorite gun i kind of skrewed it up because the trigger is on the top now and i made the mag bigger so it holds 30 rounds great gun

Oompa-Loompa (author)2008-12-23

I see two of mine in there.

yeah well they are good guns

GIVEHIMCREDIT!

and what if i dont give credit he dosent have anything the same as me, the are 2 compleatly different crossbows

The implication of the comment above is that he wants credit

Oompa-Loompa (author)The Jamalam2008-12-24

It's useless, his head is probably made of lead.

The Jamalam (author)Oompa-Loompa2008-12-25

haha lol he thinks he could pwn dsman with the crossbow XD

not friggin likely! its practically a copy of my not posted c-bow! ill post asap! *diff in most aspects*

Oompa-Loompa (author)The Jamalam2008-12-25

Not a chance.

pls (author)2008-12-23

Looks alittle like my crossbow with no stock :o

nickkoppelaar (author)pls2008-12-23

not really, my trigger system is different and same with my bow

pls (author)nickkoppelaar2008-12-23

Not saying you copied me, all crossbows looks the same in some ways.

nickkoppelaar (author)pls2008-12-23

yeah i know

About This Instructable

2,561views

6favorites

License:

More by nickkoppelaar:knex crossbowknex plasma pistlemy version of the sr-v1 knex riflr
Add instructable to: