Instructables
this is so far my best knex assult rifle.
The gun has a curved removable mag,or a no-jam straight mag,and true trigger.

This guns can reach about 50ft MAX.
I will not say it never jams because it does,but not very often ,like 1 every 3 clips.
the trigger may fail every like 100 shots fired,or by too much rubberbands.Enjoy!
P.S. "THIS GUN WAS MEANT FOR EXPERIENCED KNEXPERTS IT MAY BE VERY DIFFICULT FOR NON KNEXPERTS."
 
Remove these adsRemove these ads by Signing Up

Step 2: Handle

Picture of Handle
This is the guns handle the easiest steb aside from the trigger

Step 3: Inner and outer body

Picture of inner and outer body
probably the hardest step of the gun maybe because the stocks really hard to...

Step 4: Top rail

Picture of top rail
not hard at all...im not going to post much pics because so easy just look at intro pic k?

Step 8: Trigger

Picture of trigger
very easy
1-40 of 113Next »
what are those grey bits on the heat shield?
are you used to seeing the yellow half circle connectors?
combatknex (author)  GearsOfWarFan5 years ago
half circle connectors? which grey bits?
cool knex132 years ago
Nice gun!


But why is it on office supply's menu! :P
combatknex (author)  cool knex132 years ago
office supplys menu? whats that?
NJL4JC4 years ago
I was wondering, do you need to have the ball connectors for the mag.
gtrain5 years ago
no offense, but the stock is too big and the body is too small (in height) and the handle looks ordinary.
combatknex (author)  gtrain5 years ago
lollollollol!!! gettin revenge knowin my guns better wanna challenge????? me vs you, we both make a weapon of choice deal???? start building your gun tommorow. it has to be an assault rifle. range above 20ft. removable clip. dunkis will be our judge. your gun needs to be finished in exactly 1 week from tommorow. answer yes or no if youll accept. and btw this isnt an enemie battle. just havin fun c who will win. i still like all your guns and your xm8 but mostly your vector pwns.
i wont be able to because im workin on a gun. and its used up most my pieces, pretty much all my green rods. i am definitely not gonna break it because its just to good. here is proof. its about 3ft long, but will be longer once i add the stock
IMG_1384[1].jpg
alfpwns gtrain4 years ago
INTERVENTION
combatknex (author)  gtrain5 years ago
done with my assault rifle even though ur not doin it.
007.JPG
i've always wanted to make that gun, but never got around to it. i have to say that it looks really cool! are u gonna post? U BETTER!!! wats its range?
combatknex (author)  gtrain4 years ago
hey suppper late response. nahh not gunna post. range is 25ft shooting straight 42ft at a 45 degree angle. the foregrip folds. the mag has a mag relase button. its got the whole nine yards. btw shoots either blue or connector based ammo
ol9879864 years ago
does the mag work?
heat-seeker5 years ago
haha lol "THIS GUN WAS MEANT FOR EXPERIENCED KNEXPERTS IT MAY BE VERY DIFFICULT FOR NON KNEXPERTS." is that a excuse for a quick and easy (for you) instructable.
-this is kind of off subject-  so...do you like red alert games by command and conquer? (question to heat-seeker)
 
Yes, yes it is.
layzzzzz5 years ago
your gun works great for me and the instructable was was easy to fallow next time you should add a red dot sight and grenade launcher.
lolololololololololololololololololololololololololololololololololololololololololol

combatknex (author)  layzzzzz5 years ago
i have a pistol grip,red dot,acog, silencer, and grenade launcher already built lol.
what rods do A use to put that grey pies on on the barrel
combatknex (author)  quitdrooling5 years ago
grey rods
lugnut19965 years ago
im a knexpert ive done this since ive had knex (since 4)
osi lugnut19965 years ago
same here, except you werent building guns then were you?
d4rksaber5 years ago
ohmygad! its a ibil dog!!!!!!! aaaaaah!!!! (kiding)
lugnut19965 years ago
how many half circle conecters do i need
over 54 for the hand grip
combatknex (author)  lugnut19965 years ago
idk not to many
jbbcu15 years ago
(removed by author or community request)
where is the best sniper directions???
ILIKEPIE3335 years ago
built it smaller than I thought it would be
I love it! I ran out of pieces so I didnt build the stock, but it looks awesome
combatknex (author)  ILIKEPIE3335 years ago
probably because you dont have the stock genouse lol
actually, I built the stock (turns out I had enough pieces) and the size is actually perfect I modded it so, even though now it is a muzzle loader, it goes 50+ feet with one rubber band and can cut through paper like butter (as you can expect the mag is now fake)
combatknex (author)  ILIKEPIE3335 years ago
nice,can you show me a video or picture.Some kind of visual.
took it apart, but it looked the same as the original anyway, just a grey rod in the grip and a grey one-hole connector barrel
I built a new one, a "sawed-off shotgun I call it, but not really (its just short)
has the same-even more range,
also a barrel loader, one shot,
and modelled after ajleece's KAR 98k
it looks pretty much the same, but I'll try to get a couple of pics
This is outstanding man. I tried to make one myself, but it's not really that different from this one...
OUT.jpgIN.jpg
wooow ziet er vet cool uit man!
combatknex (author)  Miles Tails Prower5 years ago
ehh well on your gun the rail is messed up the sock is way messed up and out of proportion you need a bette vlip and handle you grip is to small and the barrell is too fat but its cool. is it sngle shot?
maybe do something about the end barrel and the stock?
the end barrle is too low and the stock has cube shapes.
4.5* its awesome to me.
1-40 of 113Next »