video laser engraving ipod with CO2 laser
this shows how you can engrave an ipod with an individual laser engraving / etching.
you design your file on any PC or MAC program, then process this graphic to the laser and the result is a permanent mark on the ipod.
the CO2 laser engraves the anodized aluminum and vaporizes the color. so you get a very crisp result.
design is up the the individual taste...
takes only a couple of minutes.
was done on a troteclaser, model called SP300.
you design your file on any PC or MAC program, then process this graphic to the laser and the result is a permanent mark on the ipod.
the CO2 laser engraves the anodized aluminum and vaporizes the color. so you get a very crisp result.
design is up the the individual taste...
takes only a couple of minutes.
was done on a troteclaser, model called SP300.
Visit Our Store »
Go Pro Today »
Just a two minute video of the laser engraving something. You showed no settings, offered no advice.
I would love some clarification on the steps, please! :)
Thank you for your comments.
For full operation of such a laser you will need to get a training, which is often part of the sale, when you purchase such laser.
Also there is a manual with all setting explained for rostering, power, speed and other related functions.
Once you have done your first 30-50 jobs, it is almost as simple as printer.
The graphic software for such job can be different - from Corel Draw to Photoshop, some even use Microsoft word to laser some text with logo.