live catch trap

Step 2: Step 2

$C:\Users\roberts account\Pictures\Picture3.jpeg$

$C:\Users\roberts account\Pictures\Picture3%20004.jpeg$

$C:\Users\roberts account\Pictures\Picture3%20003.jpeg$

You're going to be mounting a mousetrap to the open end of a coffee can as shown, so that the hinge is right at the top edge of the can.You can use two or three small screws to do this, as shown. By pressing the trap against the partially driven screws, you can easily mark the trap for drilling pilot holes. You'll need these to avoid splitting the wood when driving the screws.