Picture of maga mini bow
Photo 255.jpg
Photo 256.jpg
a pretty small bow with and enormous amount of power, good accuracy, and very strong and durable.

at max power can shoot through 1 and a half soda cans.

please write comments
Remove these adsRemove these ads by Signing Up

Step 1: Front slash barrel of gun

Picture of front slash barrel of gun
Photo 231.jpg
Photo 232.jpg
build the first two pics then use the third to put it together.

Step 2: The back suspension/ support

Picture of the back suspension/ support
Photo 229.jpg
build from these pics

Step 3: The arms of the bow

Picture of the arms of the bow
Photo 234.jpg
Photo 235.jpg
build first 2 pics twice the use 3rd pic to add to all

Step 4: Rubber band attachments

Picture of rubber band attachments
Photo 237.jpg
Photo 238.jpg
build two of these from pics 1 and two then connnect them from back support in pic three

Step 5: Connect back part to front part

Picture of connect back part to front part
Photo 240.jpg
Photo 241.jpg
connect the two pieces using these pictures.

Step 6: Build handle

Picture of build handle
Photo 243.jpg
Photo 244.jpg
Photo 245.jpg
build three of pics 1 and 2 the connect them from pics 3 and 4.

Step 7: Adding the rubber band

Picture of adding the rubber band
Photo 247.jpg
Photo 248.jpg
Photo 249.jpg
Photo 250.jpg
take the rubber band and twist it up a few times and hook each end on to the rubber band connectors as the pictures show.

Step 8: Make the ammo

Picture of make the ammo
Photo 254.jpg
Photo 255.jpg
make as many of these as you want. take a pocket knife and cut out the edges of a grey rod as done on the pics.

optional: you can also sharpen the other end of the rod for maximum damage!!!

but be careful

Step 9: Your finished!

Picture of your finished!
congrats. take your new mini bow and ammo and go shoot some crap!!!!!!!!!!