With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Hi This is a 25 nos Led operated from mains of 230v supply. I bought a flourscent lamp adapter from a scrap dealer, because its easy to disman...
Circuit diagram to that would make your work easier
Components that you would require for this project: -1 no. Polyester Capacitor 0.22mfd 400v -1 no. 1M 0.25 watt resistor. -1 no. 22 ohms 0.5 watt r...
The Screw/fastener in the middle of the CFL to be removed with the help of a screw driver for removing the existing pcb and top cover.
Cut the PVC sheet using a Jig saw that it matches with the enclosure and drill 25 nos. 5mm holes on the PVC sheet using drilling machine to your choic...
Solder the components on to the perforated board and the two wires protruding from within the CFL (AC mains wires) to be soldered to the Perforated bo...
Take a socket with two wires connected to the socket and fix your led project into this socket as shown, plug the two wires into AC OUTLET OF 230 vol...
All the best.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »