Introduction: Mat Made Out of Origami Ninja Stars

Picture of Mat Made Out of Origami Ninja Stars

In this instructable I will show you how to make a mat out of origami ninja stars. Before we get started I'll tell you what you'll need
1. a scissors
2. a lot of paper
3. skilled fingers
you will have to make a lot of the stars and it will take you a while so lets get started

Step 1: Starting a Star

Picture of Starting a Star

Get a square of paper and cut it in half as shown. the get one of the halves and fold it . After that, fold in the corners. Then repeat on the other half . make sure the corners are folded in the correct possition as shown in the last picture,amd  when you are folding the other half's corners make sure they are opposite

Step 2: More Folding

Picture of More Folding

Now fold in the corners again on both sides. Then turn one of the halves upside down and then put the other piece on top of  it as shown.

Step 3: The Pockets

Picture of The Pockets

Now put corner A into pocket A and put corner B into pocket B.then turn the  whole thing upside  down.

Step 4: Finishing the Star

Picture of Finishing the Star

now do the same thing with corner C and D as you did with corner A and B and you'r done.

Step 5: The Actual Mat

Picture of The Actual Mat

know you have to connect the individual stars together as shown in the pictures below .


NatNoBrains (author)2011-01-03

You should really try taking better pictures...
You can hardly see what you're meant to be doing.

0151n (author)NatNoBrains2011-01-04

Sorry,my camera was acting up because it didn't have enough light ,and if I put the flash on it made the pictures realy bright and you couldn't see it at all.

NatNoBrains (author)0151n2011-01-04

222th Comment!

About This Instructable




More by 0151n:how to make a personalized homepage with shortcuts.Origami Chinese takeaway boxTic-Tac box computer mouse
Add instructable to: