Introduction: Predator Helmet

Picture of Predator Helmet

turtle shell motorcycle helmet
cardboard (pizza box)
water hose
duct tape
light weight clay
hot glue gun

Step 1: Arranging the Items

Picture of Arranging the Items

1.  Cut a hole in the frisbee, glue on top of the helmet.
2. Cut water hose to side, cut down the length to split open and wrap around the frisbee and helmet.
3. Cut cardboard to shape.
4. Glue everything down with glue gun.

Step 2: Cover With Clay

Picture of Cover With Clay

cover with clay.  Place enough so it can shaped.

Step 3: Shaping

Picture of Shaping

Shape the clay to desired shape.

Step 4: Smoothing and Details

Picture of Smoothing and Details

Wet fingers and smooth out the clay. smooth further with sand paper if necessary.

Add some details and paint.  Do this after a day to make sure clay is dry.  You can add lens or black mess for the eyes.

Step 5: Finish and Adding Hair

Picture of Finish and Adding Hair

Cut the rope to size.  Wrap sections of it with black duct tape.  Hot Glue to helmet.

Step 6: Finished With Armor

Picture of Finished With Armor

Complete costume.


pkthepredator (author)2015-07-14

very cool, I will head out tomorrow to make one

lordcooler (author)2013-02-13

i made this and instead of using plaster i used ducktape

çfòóng (author)2011-09-02

Umm... can you show me how to fold the mask with the card board please?

laurent123 (author)2010-11-10

thank you for this tutorial im going to modifiy the dsign a bit but it realy helps good use of old and new materials keep up the good work man:)

Scupper (author)2010-11-04

That is a great pictorial lesson. You make it look easy

Tool Using Animal (author)2010-11-03

That is awesome, but please change your first photo to your last photo, the finished project, it will draw many more views.

Thanks for the advise. I didn't think about that!

I'll second that. The second pic in the last step is my favorite.

About This Instructable




More by manguy1:Predator Helmet
Add instructable to: