Print PDF
Favorite
Email
Step 7Prepare the LED part
Take one very cheap mini USB LED PC light and cut the plug off as near to the plug as you can using pliers.
Slip the lens off the other end of the lamp and ease out the LED, still attached to its wire (it will also have a tiny little resistor soldered in line with one of the wires.
keep the lens and the USB plug to one side. You can throw away the outer springy sheath or keep it for another project.
Slip the lens off the other end of the lamp and ease out the LED, still attached to its wire (it will also have a tiny little resistor soldered in line with one of the wires.
keep the lens and the USB plug to one side. You can throw away the outer springy sheath or keep it for another project.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
