Hello everyone, in this instructable, I will show you how to make a mini pinball machine. I hope you will like it!
Step 1: What You'll Need
For this project you will need:
A small box (I used a small chocolate box)
1 Popsicle stick
A knife or something to cut slits
A few beads
And a marble
Step 2: Cuting and Marking
Now, put the bottom part of the box inside the bigger part upside down at a little angle. now mark on the inside box with a pencil the angle that its at. Then, take it out the smaller part of the box out of the bigger. Now some where near the bottom of the bigger part, cut two vertical slits on both sides. Try to keep them a bit further up from the bottom. Now, break off two pieces of the popsicle stick and insert them into the slits. Then, mark places where you want the bumpers with a pencil.
Step 3: Gluing
Hot glue pieces of the popsicle stick on the inside of it where you marked. BE VERY CARFUL WHEN HOT GLUING
Step 4: Enjoy!
I hope you liked this instructable please vote for it!