Step 14: Part List for the Pistol. By: 619rey So Thank Him.




dark gray:4
light gray:4


black hinge:3
y connector:7
blue spacer:6
silver spacer:5
chopped gray or orange:3
ball socket:2 The connector that can fit on to a ball joint. He knows what there called.
ball joint:1 The connector with the ball on he end.
the_burrito_master do you know where I can find a knex square panel
the_burrito_master where did you get that snowflake piece in step 3
<p>the first time i saw this gun was like 6 or 7 years ago idk... now i have it next to me :D</p>
The total cost of all of these pieces from KNEX.com is over $100! But, I've spent thousands (Not me my dad when I was 6) on KNEX, but I have so many pieces in my garage I don't have enough to build this!!!!! SO RIDICULOUS!!!
Oh goodness yes!
Can you just use ball joints instead of decapitated grey connectors?
Nooo wow aren't we over this yet XD
Why not?
snap a rod into one and find out if it slides through, it wont. and it's better to just cut in half one orange ladder connector u get 2 that way.
How strong is this gun?
step 12 has all that info.
Sorry, I just diden't look through the whole &quot;ible&quot;.
i made a slide trigger for this gun, works pretty nice too!
My fave k'nex gun on this site. :P
Amazing gun, only problem for me was that it didnt fire well, so i modded it into a slingshot gun :D
i like the gun but its a shame that you have to cut the ammo
This is a great gun! It looks awesome, shoots hard and isn't flimsy at all! Nice job!
can i buld this with only 1 hinge?<br>
yes just don't build the bipod or build it differently.<br>
kool thx<br>
This thing looks focking cool.
does this look like one of the fockers?
uh... no offense, but isn't there supposed to be another grey square with a perimiter of 4 blue rods?
no you only need two.
i think they mean on pic 2 you forgot the grey square on the other panel
I think that's the middle layer I only have one of those panels.. :C
Woow. This gun is Great!! 5 stars!. If I had the pieces for it I would built it.
yeah every one says that try building only the important stuff if you want to.
instead of all the blue ones can i use snowflakes?
cool thanks i am building now just finished with the mag ps i really hope this works because last time i tried to build a big nice sniper like this it was the jams storm battle sniper and i spent all afternoon (like 5 hours) on it and it was bullshit. ratings like 4.10 dont lie so im feeling lucky. good instructions thanx so far 5 stars but it really turns out after i see how she shoots! so far so good!
The gun takes some patience to get used to it but it's ,a great old gun.
hey uh i finished and the ram only extends into the mag like about 1 inch and therefor is not shooting very far (right now like 2ft max). how do i fix this/make it shoot better? please respond soon or i will take it apart (not sopossed to be a threat just im gonna build somthing else
it's only supposed to go in the mag that far, you must have been loading it wrong did you follow the instructions? This is a really touchy gun it takes some effort to get it to work sometimes. (but when it works it really pwns)
ehhh darn took it apart looks sweet though. i loaded it by putting the rods into the mag and pulled back the ram and boom, click snap no shooting action. am i sopposed to tilt it back so the ammo goes into the barrell more?
btw turns out i dont need snowflakes! other than when needed. i am able to build thiz cuz i found 12 pounds of knex on ebay 4 30 bucks and shoed my dad and he got them cuz its a really good deal. it came yesterday and was waaaaaaay more than i thought, it rocks. btw the clock is rong right now it 1/4 till eleven im goin to bed finish the gun tommorrow the reek havok while everyone is sleeping!!! MUAHAHAHAHAHAHAHAHH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Awesome, I hope you like it when you finish it I haven't hear of anyone building it in quite a while.
for strings do the strings need to be super tough, are they under a lot of tension?
Anything that can hold up about 10 lb is fine for the trigger, but for the ram yeah it's gotta be tough. I recommend hemp kite string or parracord.
yeah sorry took it apart, the problem was that the ram only entered the magazine like 1 inch and did not shoot like at all. if you told me a good way on how to fix that i would rebuild the whole thing gladly. for now i am having a great time withe the pistol you made.
:( i dont have that many blue/orange pieces... Is it okay if i make a similar gun, just different parts?
yeah its your life go ahead do what you want. :) your not my slave lol.
nederlands ?
Yes master, lol jk. Well i didnt have the pieces(or motivation) to make this, so I totally destroyed my old sl9 and built on to it.
yeah thats fine.
I think people should only rate guns if they've built the thing. Some guns look good but are in fact crap (I can name several). However I have built this and could it be even better than my <gasp> SRv2?
i gave it five stars cuz the pistol was good
just got more parts in the mail-gonna build right now
Such as what guns? I want to know.
CBA to name them but look for yourself

About This Instructable




More by the_burrito_master:Peltier chips In a cars radiator My gaming rig. Sharpen a knife, The geeky way. 
Add instructable to: