Print PDF
Favorite
Email
Step 3Holster
You'll also need a place to store your whack-bonk when not in use. I chose a low-tech approach to hold mine, an empty plastic container slightly larger in diameter than the foam noodle.
Remove the top and bottom of the container. Create two small openings on the centre portion for cable-ties which will be used to fix the holster to the bike.
Find an appropriate place on your bike which will accept the whack-bonk. The placement needs to ensure quick deployment while keeping the bike functional. I chose the rear left hand side, just above the passenger pegs. Cable ties were laced through the openings on the plastic container and attached to the turn signal.
Remove the top and bottom of the container. Create two small openings on the centre portion for cable-ties which will be used to fix the holster to the bike.
Find an appropriate place on your bike which will accept the whack-bonk. The placement needs to ensure quick deployment while keeping the bike functional. I chose the rear left hand side, just above the passenger pegs. Cable ties were laced through the openings on the plastic container and attached to the turn signal.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
