If you have made this instructable, I would love to see pictures.
Step 1: The little beads
Pull the wire through the bead and bend the wire down.
Take the other plier and bend the wire around the tip of the plier (look at the photo)
Wrap the wire around the bead with your fingers.
Repeat for al the little beads.
Step 2: Making the pendant
Add two of the little beads to it.
For the next step, loop at the picture ( it's too hard to explain :)
Take the two ends and twist them around eachother.
At a third bead by openig and closing the loop on top of the bead.
Take the other three beads and apply them to the wire as shown.
Seperate the wire at the top part only.
Bend one wire down.
Take the the round nose plier and create a loop out of the wire that you didn't bend down.
Take a little loop and apply it to the loop you made in the last step.
Close the loop.