Introduction: My First Spit Ball/mini Blow Dartgun

in this instructable I will show you how to turn a ordanry bic med
pen into a blow gun this is my first instructable ever
so plese dont be so harsh

Step 1: Tools

Picture of Tools

you will neeed a scraper of somthing simular
and a pen probly dead you can super glue or hot glue
more of these tubes to gether to make a longer berral

Step 2: First

Picture of First

take the ballpoint tip out and the ink and use the scraper
to peal the other end off.

Step 3: Finshing

Picture of Finshing

now you need to ether make the tube longer or have it stay that small i took 3 pens and super guled them so its about half a meter
thats about as big as u will need because it can shoot about 10 meters esely and with a bit of tweaking u can add dart tips and
make a blow dart gun


ottboy87 (author)2008-04-30

mine are a little better go to Homemade Guitar i made it it rocks (litterally) Please leave comments on how to make it better

Zetheros (author)2008-03-09

You might want to use electrical tape or duct tape to tape them together, it'll be stronger and more flexible if it is accidentally dropped or bumped. My kind of ammo for these is toilet paper dipped in water.

fd93 (author)2007-11-15

To save 5 or 6 minets you can use a paper mte pencill(the kind that you twist the cap and it turns a spring) just rip evryting off and shoot

brl1214 (author)2007-10-09

ya true but i was bord so i was watching surviver man and what he had was about 10/20 pens and a mechite so he took bamubue string and reinforced oak and made a nice soft iner for a blow dar and it was about 2meter long so if u got bambo cut the string and take a wood strate rodand drill a long hole in it and there u go two ways for a blowdart

Ezza (author)brl12142007-10-31


pcneifert (author)2007-10-01

cool idea you could also use straws to connect it together so it's collapsible

X_D_3_M_1 (author)pcneifert2007-10-25

imperfections. not good!

About This Instructable




More by brl1214:my first spit ball/mini blow dartgun
Add instructable to: