what you need:
-screwdriver
-saw
-barrel material (1/2in petg pipe, 1/2 cpvc pipe, brass pipe, or hollowed out marker)
-some sort of glue (hot glue is reccomended)
-sand paper (optional)
Remove these ads by
Signing UpStep 1Unscrewing the gun.
get your screwdriver and unscrew the four screws on the side of the gun and open it up. the insides should look like this. (sorry about the red line, i had to get this picture off of nerfhaven.com) edit: pictures are from gengar003 on nerfhaven
| « Previous Step | Download PDFView All Steps | Next Step » |










































its obvies starts with a M and ends in 13 hint hint.