Step 4: Plan openings
Most laptops have feet on the bottom to raise the underside from whatever surface it will be resting on, this gap allows for increaded air circulation around vent openings and helps keep your laptop from overheating while in use. In addition to this gap for air circulation my laptop model also has the battery compartment protruding out along the entire lower back edge.
To accommodate for the vent openings and protruding battery compartment I cut through the backside of the book is select areas. This allows the book to be tightly shut, without buckling around any protrusions and allows the laptop to stay cool even though it's almost completely covered.
Place your laptop on the book (minding the orientation), mark the openings with a pencil and then cut out with a sharp hobby knife.
To accommodate for the vent openings and protruding battery compartment I cut through the backside of the book is select areas. This allows the book to be tightly shut, without buckling around any protrusions and allows the laptop to stay cool even though it's almost completely covered.
Place your laptop on the book (minding the orientation), mark the openings with a pencil and then cut out with a sharp hobby knife.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
