With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
all i can say is....CRAZY SPINNING NINJA BLADE!!!!!!!!!!!!
follow the picture for the blade!
put a gray rod through the motor, then put a tan piece in between the 4 points on the motor.
put 7 silver spacers on the gray rod
put the blade on top of the 7 spacers on the rod.
put 7 silver spacers and 2 blue spacers on the rod after the blade.then add a tan piece at the tip
this is what it should look like. make sure the tan piece at the back of the motor is very tight in or it will not spin!(if it is still not working gi...
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Remove these ads by
Visit Our Store »
Go Pro Today »