Introduction: Pallet Coat Hook

hi spending 10 mins in work shop to do looks cool and didn't cost me anything

Step 1: Find Your Pallet

building a shed for the farm so lots of pallets these are disassembled pallets or you could ask around for some

Step 2: Mark the Point

get your hooks and mark the points for the holes and go to the next step

Step 3: Drill Your Pilot Hole

with points marked get a appropriate sized drill bit and drill to the required depth and your mounting hole

Step 4: Screw It Up

put the hardware you need in the holes and give it a coat varnish or a splash of paint

Step 5: Finished

i did give it a coat of varnish but not in the photos sorry

Comments

author
DIY Hacks and How Tos (author)2015-07-12

Nice pallet project.

author

thank you please vote for me

About This Instructable

638views

3favorites

License:

Bio: maker,gardener,tinkerer and restorer of old hand tools !
More by kidintheworkshop: pallet coat hookmelting hdpe plastic
Add instructable to: