Instructables
Picture of paper box
A simple version of a paper box. This is my first instruction here and i've tried to make it as clearly as possible to understand. In some of the steps it was a little dificult for me to explain exactly how i do (my english is far from perfect...sorry :P ) but i think that the photos show it pretty well. Still should you have any problems understanding something i will be happy to explain it better.

I've notised that there are several versions of paperboxes in this site, but i haven't seen any like mine, so i hope it's usable anyway :) Enjoy!!
 
Remove these adsRemove these ads by Signing Up

Step 1: Step 1 - materials

Picture of step 1 - materials
You will need:

2 pieces of printer paper
A pair of sissors
A pensil
And a ruler

You might also need some glue

Step 2: Step 2

Picture of step 2
fold the paper (like shown in the photo.)

Step 3: Step 3

Picture of step 3
draw a line so the folded flip makes a triangle.

Step 4: Step 4

Picture of step 4
cut along the line

Step 5: Step 5

Picture of step 5
now you have a square (you wont need the other piece of paper...unless you wanna make a smaller box after this one)

Step 6: Step 6

Picture of step 6
P5272795.jpg
Then you fold the square in diagonal and open it again.

Step 7: Step 7

Picture of step 7
P5272798.jpg
then you fold all the 4 corners on the paper into the center.

Step 8: Step 8

Picture of step 8
P5272802.jpg
The fold one side of the square into the center (like shown in the photo) and do the same to the other site (so it looks like the second photo.)

Step 9: Step 9

Picture of step 9
P5272805.jpg
P5272807.jpg
Then open and turn the square 90 degrees and do the same with the other two sites of the square (like step 8). Then you open again (it should look like in the last photo.)

Step 10: Step 10

Picture of step 10
P5272812.jpg
then cut 4 cuts into the top and the bottom of the paper. Careful not to cut too long or too short but the important thing is that the two flips (top/buttom) can open (see step 11)

Step 11: Step 11

Picture of step 11
P5272814.jpg
pull out the two flips in the top and the bottom (like in the first photo) and fold in the two sites shaping the sites of the box (photo 2).
1-40 of 56Next »
gustavo132 months ago

this did not help because it didn't finish the box instructions

.

Caileywoods3 months ago

this is cool

CAScreate5 months ago

easy and fun

roxy9517 months ago
SO EASY!!!Good job!!!! :D
ninjago8767 months ago
this is very good I have been going threw lots and lots of steps but none of them have helped intill I found this and good job
This is just fantastic - thanks so much for taking the time and trouble to make this tutorial! I was looking for handmade boxes to house my painted stones and pebbles, and this is perfect :o) The last couple of stages were just like magic - I actually clapped and threw my hands in the air (and this from a 'reserved' Brit!) LOL ... THANK YOU :o)
hey u can do this without cutting the paper also...
this way u could also hold water in it..

nice tutorial btw
lesly22 years ago
Very goooood!!! thanks a lot!!!!
deluxmouse2 years ago
Great easy detail to follow, if i can makeit everyone can thank you
that's all i need
tamahlg3 years ago
Awesome! I always need little labeled boxes to keep my electronic components organized (screws, etc). This is just perfect! Thanks for posting :-)
lambo73 years ago
I didn't notice your english until I went back and re-read the first step. Your english is just as good as mine. Okay, maybe not as good as mine, mine's terrible. As good as my best friend's english. That's pretty good.

-Lambo Bovino FV
lambo73 years ago
Lifje- Thanks for this box! I needed a small box to hold marbles in, and this works! I didn't make the lid, but it still looks nice. I tried the actual origami version (without cutting- origami is all folding) and couldn't get it to work. So thanks again for an easy foldable!

-Lambo Bovino: FV
cloggy013 years ago
well thanks for posting this instructable, I was looking to make a paper box for my money/ spare change and this works! tip for money: if you dont glue the flaps down you can use them to hide notes :D ~Chloe
bankersgirl4 years ago
Thanks for this instructable, I've been looking for a way to make boxes with lids for storage. I appreciated seeing this.
chomper964 years ago
i like tis box i made it at school and uesd it for a little trash can for paper scraps and a teacher told mem to make some for the whole class and the classroom actualy got alot cleaner. thanks this is one of the best oragami i seen. i will be having oragami instructables some time soon
haley884 years ago
my brother  jordan tried this and he did it tottaly wrong so, he diseded to make his homeade box its like a pacage i think its alot better than ur box
SteveGerber5 years ago
You should be using the word flap not flip.
 we get what he/she/robot means...
SteveGerber5 years ago
Step 11 typo: >> shaping the sites of the box (photo 2). should be: sides of the box
 oh well we get what she/he/robot means...
Mavamaarten4 years ago
Whoa Very nice tutorial ! Your english is not that bad :) Mine is worse :P I'm amazed with the result ! It's such a 'clean' box !
doglover775 years ago
This box is simple and easy, that's why I like it.
Preblopa5 years ago
I love this! Thank you for posting it, I have been compulsively making paper boxes since reading the instructions.
chubaka5 years ago
Mmh, I love paper works & this is one of my favourite now
Thanks for posting it!
canno5 years ago
cool lots of typos very simple i'll definitely make it tonight xD 5/5
SteveGerber5 years ago
Nice origami Instructable! I just finished making a box using your photos and I found the process to be easy to follow. Thanks for sharing.
One of the best! Keep on the good work! Awesome...
halo2party5 years ago
This very cool! 5 Stars!
AznPanda5 years ago
Hhaha this reminds me of something i did i jsut forgot how to make them i made like 20 of them each one a lil smaller and put em on eachother it looked like it was just one :D
fireclown5 years ago
Great instructions, and a neat little box. My only suggestion is that because the floor/roof "tabs" make the box really stable when you fold them back together in step 12, glue might not be necessary, but just a little tab of scotch tape covering all four corners.
flirt1235 years ago
wish this involved flirting :) but i still love it its cute
Flumpkins6 years ago
pencil*
alyssapie6 years ago
this is SO SO cute wish I had the pacence for this i lost you at getting the paper folded in half.
Ecliptic6 years ago
This is just awesome!!!! you can modify this to look like a mushroom if you need to put more stuff in it!!! but how do you do that??? either way, thanks!! :D
tsikoman6 years ago
I LOVE IT
mhavrilla886 years ago
This is really cool i like it! ***** 5/5
sorry,it looks like i swore but i meant 5 stars.
filthyfury6 years ago
i was wondering how to make a top for mine! thanks
freakinslop6 years ago
sweet 'ible
1-40 of 56Next »
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!