Paper star.( 3-D)

this is a pretty simple way of making a cool star out of a strip of paper.

what you will need: paper(prefferably printing paper)
                                    a marker to draw faces(optional)
Remove these adsRemove these ads by Signing Up

Step 1: Cutting the strip

just cut out a strip of paper a little less than an inch thick. the thiker the strip the harder it is to make the star.

Step 2: Fold the strip

you must make a loop with the paper to make the shape of a pentagon that should look like the pictures below. after this keep folding it along the edge until you only have a small part of the strip remaining, tuck it into the other folds.

Step 4: Voila!

well you should be done with your star. it may take practice to get it to look good. but uh,, your welcome if it turned out cool. hehe