Picture of paperang
this is the most awesome plane i have ever flew because it gives an awesome feel

this is the official site of the paperang

Remove these adsRemove these ads by Signing Up

Step 1: Materials & tools.

Picture of Materials & tools.
1 a4 paper

Step 2: 1st fold

Picture of 1st fold
fold in half

Step 3: 2nd fold

Picture of 2nd fold
fold corner 1 down
repeat on other side

Step 4: 3rd fold

Picture of 3rd fold
fold point up
repeat on other side

Step 5: 4th fold

Picture of 4th fold
Picture 38.jpg
cut like in the pictures

Step 6: 5th fold

Picture of 5th fold
i can actually only show you this step
you have to fold the bottom of the triangle up over the new line in the icture

Step 7: 6th fold

Picture of 6th fold
fold everything down

Step 8: 7th step

Picture of 7th step
fold the point over

Step 9: 8th fold

open up
since this speaks for itself you dont need a picture

Step 10: Fold 9

Picture of fold 9
Picture 44.jpg
tuck in the piece that is out and staple

Step 11: DONE!!!!

Picture of DONE!!!!
to throw get it by the tail and open your hands when you throw it
Foxyrocks20014 months ago

really good

Foxyrocks20014 months ago

really good

Foxyrocks20014 months ago
i need help for all of the steps i find them hard
legobrick557 years ago
Will this work with a 81/2" x 11" sheet?
Sure! I just made one, and it works very well.
dunnos (author)  legobrick557 years ago
i dont know...
try=D id love to see a foto/film of it =D
woody5585 years ago
This works great! It's an excellent glider, and not to hard to make!
hivoltage7 years ago
Ed Hui, the original creator of the paperang, is actually an instructables member. there was another instructable on a paperang variation called the canardwings that was posted where he expressed that he would like to be asked before instructions to his invention be posted, so it is probably a good idea to shoot him a message to make sure he is ok with your instructable. his instructables username is edhui and you can read his comments on the other instructable Here
that said, you did do a great job of illustrating the process.
Edhui hivoltage5 years ago
Thanks for  pointing that out. Funnily enough I don't remember being asked about this one (I haven't heard from dunnos). I got notified about this by Google alerts today.
Anyway, I'm glad people are enjoying the Paperang. It's true, I don't like seeing my design reproduced elsewhere, but at least there's a link back to my website paperang.com where there are photos of the construction process and a downloadable pdf. I only charge for the printable pdf.
The web is a funny place. I guess I can get my head around content being delivered at very low cost, and I really like instructables and the folks that come to this site- so I'm really not too concerned here. But I do pay for music downloads, and in the end I don't want paperang pdfs to be freely available without any connection back to me- I don't know what that pdf is that's posted here because I'm not a pro member, so if it's my pdf I'd appreciate it if you (dunnos)  remove it.
Meanwhile, I'd like to draw everyone's attention to the Paperang Moth, which is a whole different thing. There's a Youtube video at  www.youtube.com/watch 
Hope you like it. Instructable folks should be able to guess how to make it, but if you do, please don't post an instructable on it... There's a book about it.
Mr.A-Z Edhui5 years ago
How do you throw it so it'll come back to you?
dunnos (author)  Edhui5 years ago
actually, i did ask SOMEONE about this instructable so if it wasn't you I want to tell you im sorry.
Anywho.. the pdf's at instructables consist of the instructable itself. it isn't yours.
if you'd like me to remove this instructable i will do so.


Edhui dunnos5 years ago
 Thanks for letting me know. That's fine no objections to your pdf- glad you enjoyed the Paperang.
dunnos (author)  hivoltage7 years ago
done that and thanks =]
badboy335 years ago
can u plz show mw how to do it it is confusing
pretty good, but for step 8 how do you fold the points up?
Did you have a seizure when you were taping this?
legobrick557 years ago
I tried it and it works pretty well I play around with the dihedril angle and wing shape
dunnos (author)  legobrick557 years ago
cool nice to hear... do you know how i can see who voted for me?
I dunnos either tee hee. but I did :P
dunnos (author)  legobrick557 years ago
thanks =]
Looks like a good plane. You should probably put more into the video though, it looks like an awesome glider though.
dunnos (author)  GorillazMiko7 years ago
nother video posted!
mag4007 years ago
i knew how to make this before you posted an instructable on it!*no offense*:) oh yeah, the owner once put the design in a paper and it was award winning!!