Print PDF
Favorite
Email
Step 4Assemble everything.
Put the circuit in the pen,
the long wire through the little hole.
Trim the short wire so it only comes slightly above the top.
Then strip and bend like in the picture.
Tape the button cell on top of the pen so that the wire you just stripped is on the - side of the battery sorry no picture.
the long wire through the little hole.
Trim the short wire so it only comes slightly above the top.
Then strip and bend like in the picture.
Tape the button cell on top of the pen so that the wire you just stripped is on the - side of the battery sorry no picture.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
