Print PDF
Favorite
Email
Step 19Case: Large Gear (optional)
Insert the post of the 3/16"x1" binding screw between the case and the large gear into the hole on the edge of the large gear as shown. Wind the scew into the post. This will be the handle to turn the gear.
Then insert the post of a 3/16"x1/4" binding screw inside of the box and through the hole as shown. Place one #10 SAE washer onto the post and then place the large gear on top. Finish by winding the screw into the post.
Test the gear with the handle to see how smoothly they run!
Then insert the post of a 3/16"x1/4" binding screw inside of the box and through the hole as shown. Place one #10 SAE washer onto the post and then place the large gear on top. Finish by winding the screw into the post.
Test the gear with the handle to see how smoothly they run!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
