Introduction: Petrol Mini Motorbike How to Disign the Proper Way, With Honda Gx25cc

Picture of Petrol Mini Motorbike How to Disign the Proper Way, With Honda Gx25cc
Ok this has been a small project that i have done, it is a honda gx 25cc hedge trimmer engine attached to a small push bike, with bigger handle bars and so on. the engine is mounted by a solid metal frame, welded on. then the engine is lined up with the back wheel, unlike the other little drives, with a roller onto the wheel it is driven by a bike chain. There is a shaft extended out of the gear box of the hedge trimmer engine and a welded shaft onto it. it has a small gear held onto that, that is then lined up with a big cog at the bottem to give it a low gear ratio to not strain the engine. it is revved by a old gear shifter off a push bike, much like a quad bike. i also have a kill switch to stop the engine. the engine is 4-stroke so it uses very little fuel, for how fast and far it can go, and you can still peddel if you want to go faster!. i want to make another video on it. but here are some pictures and a video to help :D please tell me what you want and also look at my other youtube videos thanks :D
watch my video here vvvvvvv


 

Comments

DevM8 (author)2016-07-02

really fun and comfy. slowwwwwww.

DevM8 (author)2016-07-02

really fun and comfy. slowwwwwww.

DevM8 (author)2016-07-02

whats the fuel tank like. how far can you go

DevM8 (author)2016-07-02

whats the fuel tank like. how far can you go

bobsonjoejoe (author)2014-09-11

how many teeth on the big sprocket?

bobsonjoejoe (author)2014-09-11

what gear ratio is that?

About This Instructable

4,931views

18favorites

License:

Bio: Hey buddy's! I pretty much just post stuff I've learnt in the shed! Follow for more!
More by danbranxl:Basic Stainless Butterfly Knife!How to make stainless exhaust!stitching on a Instructables patch.
Add instructable to: