This instructable is for a large diy wooden picnic table which is easier to step in than a traditional picnic table.
The picnic table in the construction pictures is one without the corners under 45 degrees like in the first picture.
It is made completely of two by fours (89x38)
Step 1: The two benches
I used some m8 threaded rods to connect the leg constructions.
In total is have used 24 each 16 cm and have cut them when the table was ready.
Some coach bolt will even look better.
For the other connections i used wood screws of 80mm.
Click on the pictures for a larger version of the picture.
A google sketchup version can be downloaded here