Introduction: Pilot G2 Pen Gun

Picture of Pilot G2 Pen Gun

this is not a affective gun because its not as power full as others but still fun to scare people with

Step 1: Take Apart the Pens Mechanical Parts

Picture of Take Apart the Pens Mechanical Parts

this is the first step so don't think its too hard because its really easy it only takes a few second to do.
1. take all the mechanical parts out such as the spring the top and the that makes the pen click. the spring you'll need to force out through the front with a mechanical pencil.

Step 2: Insert the Part That You Use to Click the Pen

Picture of Insert the Part That You Use to Click the Pen

just slip it through the upper tube

Step 3: Insert the Sping

Picture of Insert the Sping

Step 4: Insert the Part of the Pen That Looks Like a Motor for a Fish Tank

Picture of Insert the Part of the Pen That Looks Like a Motor for a Fish Tank

Step 5: Cut the Front of the Pen Until You Can Fit a BB Through the Barrel

Picture of Cut the Front of the Pen Until You Can Fit a BB Through the Barrel

it all depend on the BB you are using i just used copper ones because they're heavier.

Step 6: Use the Ink Cartridge to Cock the Gun

Picture of Use the Ink Cartridge to Cock the Gun

insert the ink cartridge in the upper barrel . this allows it to be cocked and ready for firing .

Step 7: Last Step

Picture of Last Step

Just screw on the bottom part and then the gun is compleate

Step 8: When Your Finished With It You Can Make Modifications to Make It Shoot Farther

a helpful hint ; if you're using this in school, you can put the ink cartridge back in so you can write with it , and it doesn't look suspicious .

Comments

admin (author)2009-03-26

Hey, this is a great instructable and is very informative. Just one thing is missing... pictures! It really helps a lot when trying to follow directions so you should consider taking some photographs. Once you do that and leave me a message when you have so that we can publish your work. Thanks! Thanks for the cool instructable and we hope to publish this soon!

NickyU (author)admin2015-04-23

why do parts fall out like it is not locked in. I set it up correctly but everything just slides off.

pyroninja9 (author)admin2009-03-28

i have put pictures on

strcrusher (author)pyroninja92009-04-27

lol u answered admin

pyroninja9 (author)strcrusher2009-05-10

uk wat in the Quote of my good friend Ben M. " I Don't Really Care."

cplex made it! (author)2016-06-09

to cool

cplex (author)2016-06-09

my friend made something like this

cplex (author)2016-06-09

love it

cplex (author)2016-06-09

awesome

MultiTheMightyOne (author)2012-12-13

the pen doesnt work after a while. soon, the pen wont be able to hold the spring back and it'll be ruined. but u can still use it as a normal pen if u reassemble it

origami dude (author)2010-02-01

 nice gun i usually use the springs from sharpie highlighters or retractable markers cuz its super powerful, but u need to push a "part of the pen that looks like a motor of a fish tank" into another to keep it loaded... i also cut the tip in half and use the grip on the clip (if removed) and the stub piece of the tip

kidkid108 (author)origami dude2012-10-23

I like the way you described putting the spring from a shapir cuz I was just thinking that!can you make an instructable on that?

About This Instructable

24,833views

5favorites

License:

More by pyroninja9:Paper clamp Gunpilot G2 pen gun
Add instructable to: