Introduction: Pipe Lamp, Plumbing Parts,steampunk,industrial

Picture of Pipe Lamp, Plumbing Parts,steampunk,industrial

a duo lamp, just for decoration .

Step 1: Parts Needed..

Picture of Parts Needed..

4 x 1/2 inch 45/degrease fitting

2 x pvc end kap

40 cm 1/2 inch pipe

2 fitting 1/2"

1 T fitting 1/2 "

2 j 15 lamp holders

1mrt electric cable

3 cable connections

Step 2: Putting Things Together..

Picture of Putting Things Together..

the pvc parts are glued with color less bond.

the fitting with strong bond.

also the fitting in the pvc i used strong bond.

all the other connections i just firmley connected together.

Step 3:

Step 4: Electrics Safety..

Picture of Electrics Safety..

beware, the wire is safe to use, and nowhere in tough with the metal parts..

Step 5: Finished

Picture of Finished

a peace of hardwood for the base to stand on, some clear coating, and ready to stand for decades in the right place..



oldship (author)2015-09-30

thx for the comment ....

СергейБ3 (author)2015-09-29

Красивая идея и очень оригинальная!!!

About This Instructable




Bio: Just a normal person, ill think... hobby is to make things from scratch........ Teacher at a vmbo school, electrics,metalwork,plumbing,central heating and energy..
More by oldship:pipe-lamptime for a clocksteampunkstyle lamp
Add instructable to: