Print PDF
Favorite
Email
Step 8Optional adhesive and waterproofing
Because this was printed with an ink jet printer onto paper, the map will be very sensitive to any water that gets on it, so I chose to coat the pages with spray on waterproofing.
I also chose to spray adhesive onto the white back side of the map so that the pages would be more compact and look neater. However, if you don't use adhesive, you can actually unfold the thing again and get a better birds eye view of the whole map, which might be better actually.
Be aware that the more careful you are about trimming, cutting and folding, the neater the finished result will be and the more pleasing the finished booklet will be.
Thanks for reading and I hope you like this little map book.
I also chose to spray adhesive onto the white back side of the map so that the pages would be more compact and look neater. However, if you don't use adhesive, you can actually unfold the thing again and get a better birds eye view of the whole map, which might be better actually.
Be aware that the more careful you are about trimming, cutting and folding, the neater the finished result will be and the more pleasing the finished booklet will be.
Thanks for reading and I hope you like this little map book.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
