Introduction: Pretty Safe Duct Tape Nunchucks

Picture of Pretty Safe Duct Tape Nunchucks

all you need to make these is : duct tape and scissors

Step 1:

Picture of

first cut two pieces of tape about 10 inches long.

Step 2:

Picture of

next tear off a lot of pieces about 2 inches long then cruple them up and place them on each one of the 10 inch pieces like in the pictures.these will be the handles.

Step 3:

Picture of

next you want to cover up the crumpled balls of duct tape

Step 4:

Picture of

next you want to make some 12 inch pieces and fold them up so they are about 1/2 inch wide like in the pictures.you will need to make three of these.

Step 5:

Picture of

tape all three 12 inch pieces together.the handle in the picture is just for size.

Step 6:

Picture of

now you have tape the strip to the handles like this. you might want to put more duct tape in there so it is stronger. and now you have a finished nunchuck.

Comments

susceptiblesolo (author)2011-12-30

As a kid who bopped himself in the head too many times with homemade wooden nunchucks I like this idea. Wouldn't string allow the clubs to swing better?

About This Instructable

1,987views

3favorites

License:

More by jillhohn:pretty safe duct tape nunchuckseasy duct tape lightsabersuper easy chalk board
Add instructable to: