Pure sine wave inverter using pic microcontroller is designed in this project. Ferrite core or chopper based pure sine wave inverter is designed in this project. There are two main parts of this project

1.DC to DC converter using push pull topolgy which converts 12 volt dc from battery to 311v DC which is peak voltage of 220 volt AC sine wave

2. Second part is H-bridge driver with SPWM which converts 311 volt DC into 220 AC

3.Pure sine wave inveter A-Z

<p>Nice design. Thanks for sharing. </p>

About This Instructable



More by MicrocontrollerLab:PIR Senor Interfacing With Pic Microocntroller Home Devices Control System With Cayanne  AC Current Measurement Using Difference Amplifier and Microcontroller 
Add instructable to: