Introduction: Pvc Dart Gun SHOOTS UP TO 20 FEET

All we need for this project is;

a piece of pvc about 12'' long, a rubber band, a pen (that can be taken apart in the middle), and duct tape

some tools that would make your experience better;

a hacksaw, vice, and siccors

Step 1: Step 1

Take the pvc and put it in the vice and take the hacksaw and cut the pvc into a 4'' section

Step 2: Step 2

take the rubber band and cut it in half

Step 3: Step 3

Take the cut rubber band and take the pvc. put the sides of the rubber band on the pvc.

Step 4: Step 4

duct tape the ends of the rubber band to the pvc.

Step 5: Step 5

Take the pen and take it apart. use the tip of the pen, but not the metal tip the middle of the pen

Step 6:

Their is your new pvc gun. also if you want to be mean, cruel and just plain old rude. you can attach a match to the top of the pen so if you light the match and then shoot it it will catch on fire.

Comments

author
seamster (author)2014-10-30

Very clever little shooting device!

Be careful and don't shoot anybody's eyes out, ok? :)

About This Instructable

261views

2favorites

More by explocivo12:760 Pumpmaster .22LR riflepvc dart gun SHOOTS UP TO 20 FEET
Add instructable to: