In this instructable, I will be showing you how to make a really cool razor blade necklace out of a soda can. You can't cut yourself or anyone else for that matter with this, so it is perfectly safe to be wearing around your neck. Please don't blame me if you take it to school and a teacher takes it or a policeman thinks it is a weapon.
Step 1: Supplies
Here is the supplies list. You should be able to find most of these around your house.
-1 soda can. any kind will work, except for the heavier cans with food.
-1 pair of scissors
-1 power drill and drill bits. if you don't have one of these, you can use anything sharp. It will just take longer.
-1 hot glue gun, epoxy, or crazy glue. I prefer the hot glue gun, but really any kind of glue will work.
-1 pair of pliers.
-1 necklace chain or string.
-1 razor (to check if yours looks just right)
Step 2: Getting your can ready
First off you need a good sheet of metal from the can. Start by cutting around the top of the can, then the bottom, and cut the cylinder you are left with through one side. After you finish that you want to smooth out the sides. Just cut around the edges carefully and keep it straight and smooth.
Step 3: Making the base
Cut off a piece from the bottom about double the height of the razor. Fold it in half (up and down) with the silver part out. Then crimp the fold with the pliers and trim it so it is about the size of a razor.
Step 4: Making the top
Cut off another piece from the piece of can. It should be a bit shorter than the razor. Fold it in half with the silver side out and crimp with pliers. Trim off any uneven parts. It should now be about 1/3 as tall as the razor.