removable ironing-board top (on a cabinet)

Step 5 Attach Velcro Loop Strips (the hairy side) to Cover

Take the four Velcro loop (hairy side) strips (four: we cut the strip into two strips the size of the cabinet top width, and two strips the cabinet top depth) and pin them to ends of the Cover, on the side you like the least (the same one you sewed the Batting onto). Sew onto the cover.

Originally I had intended to make a neat stitch all around the Velcro strip. I found out that it was a bit of a pain to sew, so I made do with one stitch down the middle of the strip.

* why I chose to attach the loop and not the hook strip to the cover: the hook strip is the side everything sticks to, and I suspect would cause havoc when washing the cover.