rocket rifle prototype/concept

this is a model rocket engine gun
it shoots a size model rocket engines.
feel free too customize.first instructible so be nice.
sorry for no pics.:(

Step 1 Wood furniture

for this instructible you will need :
barrel : copper pipe
wood furniture : 2x6x4
adhesives/mounts : misc.screws,hoseclamps,glue,sand paper,etc.
optional : rubber tubing(to make grips and cheek rest.),
rail mount for scope,bipod attachments silencer,etc.
igniter : stick lighter w/ flexible barrel thing.


1. draw design of gun onto the wood piece.(note the picture)
you can use my design or make your own.

2.using a saw cut out your design.
3.sand to perfection.(or until you like how it looks)

Comments

[evilgenius 398]

i am going to add more pictures soon.

[Erika888]

"i'm not responsible for anyone's stupidness" ahaha nice. sweet looking rifle. =)

[MillenniumMan]

Did something akin to this when I was 14-15. made mine a barrelloader though. Had to add terminals to the end of the rocket, so that when I slid it into the barrel, the electrical contact was already made when it hit the bottom of the tube, and I just had to push the trigger. Most expensive 20 rounds of ammunition I've ever fired off in the course of a minute. Last note of mention, create a backwash shield to protect your face. Safety glasses are good, but full face protection is better (knows from experience)

[comander01]

cool idea, be even better if you could put rifled slots in the barrel for fins, and have it so that the engine slides onto an igniter, and the trigger connects two wires to discharge a battery or capacitor. You may also be able to make it so that the igniters are on a clip, and make a clip for the engines. Your single shot has now turned into a semi-auto! Oh, the possiblities! Great for high population areas!

[evilgenius 398]

or put the igniter wires on the fins