Introduction: Romantic Binding Ring
Use the off cuts from binding to make a romantic ring.
Step 1: Ingredients
heart shaped hole punch (if you don't have one around the office you can get them at scrapbooking suppliers)
Step 2: First Cut
I've made this ring with a quite large centre, but you can cut the comb to the size you want.
Step 3: Cut Comb
Put the comb into the punch - it doesn't really matter if the heart isn't in the middle it will still look fine.
Step 5: Cut the Ends
The comb might be too long and cover the heart so you may have to cut the end.