With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Finally, we have a rose light with a low budget.We spent 12 dollars..You can put your rose light where ever you want:)
Hi everybody! In this project, i made a light that is eco-friendly and cheap.The materials i used, aren't harmful for the enviroment.Also its form mak...
1)Corrugated cardbaoard 2)Band Saw 3)Light bulb 4)Spray dye 5)Trace paper 6)Glue 7)Scissors 8)Lighting fixture
Firstly i began with the rolling of the corrugated cardboard paper.I made a 28 cm diameter cylinder.If you want to make different sizes,you can roll t...
Then i draw a wave on the cap of the cylinder.One important point is not to cut the wave form in a sharp way..
And, to put the light bulb inside, we have to carve out the rest of piece that we didn't use.We have a little cylinder and this makes the rose caps st...
I applied the glue to the back face of the corrugated paper and rolled slowly .Rolling a little hardly is suitable for the rose form.
We connected a light fixture in simple way.An electrician can help to do it..
After to put out the light bulbs,i dyed the rose caps with the color of a rose..
I draw a rose shape in autocad program and i saved it for you in A3 jpeg format.Then i cut out the rose shapes.I glued trace papers to the kraft pa...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »