rubber band powered ornithopter

 Hi, 
 this is one of the ornithopter that i made .its very easy to make it .all you need is
1.white glue
2. icecream sticks(nearly 10)
3. papers(tissue)
4. paper clips.
5.rubber bands,
6.craft knife
7.steel scale
8.a pair of scissors
it hardly took me 2 hours to meke it  to fly it ,thats how easy it is.

Step 1: Crank

the crank produces the flapping motion in the wings

Comments

[MCepster]

awesome but it would be helpful if you explained it better

[eyesee]

Very good

[mechanics man]

Wow it's good but can you explain the steps better.

[ryanjordan23]

dude this works but you should explain all the steps

[aby05]

thanks v much ,

[sherrington2]

Okay look you need to explain these steps more accurately! most people will not be able to make an ornithopter from this instructable!

[aby05]

yep ,i too thaught that,i will keep that in my mind for my next instructable ,....thanks

[jensenr30]

Da-Vinci was pretty awesome...

[ShemySheza]

You can say that again......

[dombeef]

Da-Vinci was pretty awesome...

[aby05]

yep.. sure he was.

[rimar2000]

Very nice and interesting. I suggest you the following, if it is possible:

1) A little video, flying (10 seconds or so)
2) Some explanation notes over each image. Example, I don't understand that little stick over the center of the wings. Consider I am not anglophone, as many other members/readers of Instructables.

[aby05]

thank you very much Rimar,i will take care of that from next time . and will try to post the video soon......by the way that little stick act as a stabaliser and here it doesn't let the wings to collapse togather while flipping upward .......i will soon post a more robust and simple design.

[rimar2000]

Thanks, aby05.

[sek98]

cool ,thanks for such an interactive approach,great work keep it up

[aby05]

thanks buddy