Knex Rifle





Introduction: Knex Rifle

the gun can fire anything that can fit in the barel
but the hopper can only be used for blue rods

Step 1: Make the Firing Pin

make this or make the one on the updated stuff

Step 2: Make This Piece

this piece uses the following pieces
9 yellow semicircles
5 circles
5 grew rods
2 white rods
2 orange pieces
6 little black pieces

Step 3: Make This Last Piece

i am sorry but you guys will have to try and figure how to build this piece from looking at the pictures.the inside is quite simple its just those small blue things

Step 4: Put All the Pieces Together

after putting all the pieces together it shoulds like something
like this

Step 5: Updated Stuff

this is a much better fireing pin it also stblises the gun when fireing cause there is even wieght on the eather side of the pin

and this hopper i like more you just pop the rods in through the hole



    • Paper Contest 2018

      Paper Contest 2018
    • Trash to Treasure

      Trash to Treasure
    • Epilog Challenge 9

      Epilog Challenge 9

    We have a be nice policy.
    Please be positive and constructive.




    dude u should really show ppl how to make this piece cause i want to make this gun a lot

    i was 11 when i made this i went of instructables for a while if your still intrested i can post some good photos

    dude look at the new pics that i added on updated stuff sorry about the bad pics please try to make it from the pics i have shown the part in all angles youre probebly strugeling with the inside bit its really simple its just those little blue bits have a good look at the pics

    ok how exactly does this gun work? fo u need rubberbands?

    rubber bands... i made this a long time ago i was 11 if you still care i can post some good photos.

    not a real semi-auto!!!!!!!!!!!!!!!!!!!!!!

    Semi-Auto is when every time you pull the trigger it fires one bullet.

    not exactly, thats the idea but this is a real K'NEX semi-auto by our standards: every time you pull the trigger it fires, pulling the trigger half way cocks the gun and then pulling the trigger back all the way shoots it. you can't just hook the trigger up to the ram and call it semi-auto. the trigger has to cock the gun and then let go of the ram to fire it.