Instructables

Simple bike trailer

Have you ever wanted to make a quick and simple bike trailor for under 20 bucks, well now you can.   
   
    YOU WILL NEED.
1. an old childrens bike.
2.an old backpack frame
3.steel tubing
4. 2 carabiners
5. the things you use to hold copper pipes to the wall.
6. steel screws


   

 
Remove these adsRemove these ads by Signing Up

Step 1: Getting ready

First take your bike and take off the wheels.  then take your back pack and take off the frame. then you are ready to start assembaling.

Step 2:

Picture of
1213102137c.JPG

Now you will want to take your wheels and your frame.  first drill a hole in the frame a little more than half way back then insert the wheel and bolt on. then repeat on the other side of the frame.

Step 3:

Picture of
now take your pipe and flaten it on one side. then screw it to the back of your bike by the wheel.

Step 4:

Picture of
now take your coper pipe things (as described in the intro)  and atatch then to the end of your frame and bike and atatch the carabeners togeter.      GOOD LUCK PLEASE COMMENT.
l8nite3 years ago
While Im sure this will work well in the short term you really need a bearing or something where the tire attachs to the frame as well as washers and locknut or lock washers. The 2 carbiners is a good idea
justindouthat (author)  l8nite3 years ago
yes i thought about that but i set a goal to do it in 2 hours. but thx for the advice
You know, this is a great idea for a quick cart. I am welding one for a homeless man right now and it is not easy designing something while you are learning a new skill! I will have to take pics and upload an ible. My goal is to make a cart that will haul a push mower, a blower, weed eater and a few small hand tools for him. He is older and diabetic, and he is concerned that it will be too heavy. I am concerned that it will stress the frame if the metal is not thick enough, never having welded before. We are using kid's bicycle wheels, thin metal walls and thin wood with support under it. We can replace that when it finally breaks. I happen to have an old backpack lying around...liking this cart idea lately!
justindouthat (author)  lsmith2542 years ago
Good luck
tonyscott3 years ago
anyone it's good to improving, but still the primeval idea was just great.
Some good ideas here, but I don't think there is a very good margin of safety. I would hate to have this come apart on the road, it could be very dangerous.
justindouthat (author)  Ludwig Von Mech3 years ago
yea that would stink but i try not to go to fast when i have it on
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!