this is my simple knex safe. it is simple because it is mainly made to demo-straight the main mecinism. it is my first instructable so srry 4 bad instructions. it is based on i am canadians safe that i got bored waiting for, so give him some of the credit. please build and rate 5*!!! :) 
ps: this is the first knex safe with instructions on the whole of the internet!!!!

finaly sorted out the jumbo video!!!!

Remove these adsRemove these ads by Signing Up

Step 1: Turney thingy

 this is the part that you turn to get in.

Step 2: The mechinism frame

 this is the part that holds the bit you just made. dont worry!! this step isnt as long as the last.

Step 3: The butten

Picture of the butten
 this is the butten that you push when you have entered your code. this step is even easyer!

Step 4: Twistey thingy

Picture of twistey thingy
 this is the thing that you twist once you have pushed the butten. this step is the easyest!

Step 5: The door

 this is the door that opens once you have done all the other stuff. this step is sort of mediem

Step 6: Thing that guards the square things

Picture of thing that guards the square things
 this stops peoples hands getting into the main mechinism!! this piece is extra easy but, be warned the next 2 steps is deadly hard!!!! :o 

Step 7: The box. what thats the shortest name weve had so far? what happend to all of the ridulessly long utter rubbish names we have had so far??? o there it is.

 not much to say.... its the box where we store stuff....thats all....what.... you want your monney back.....

Step 8: Assembly!!

 finaly it is the part you have been waiting for.... the assembly.  this is the last building step step.
1-40 of 121Next »

can i just make this out of mini k'nex?

Lol u can just take the pieces off and just get the stuff out
very cool and i made it and it works great
gyugyguyg3 years ago
your safe opens without a code
Knex12353 years ago
it doesnt open
Knex12353 years ago
i dont get the 7th step that box thing
how much space does it have and how do you unlock it?
zbrown20163 years ago
hello everyone i have a really nice video showing how the the whole mech works
szzxzzs3 years ago
hi i have build this safe and modded it
pls watch my modded safe and rate
nev mind, u should totaly use the green part for armour!
I don't understand this step
knexsim3 years ago
never mind i guess that was 3 hours waste of time ty verry much and u cant stop me i broke it up opps there gose the door hinges lol

try and make a eseyer and smaller safe and do instructions or cand u recomend some one with instructions ty
knexsim3 years ago
umm i built it and when i tryed turning the wheel bit non of the 4 wheels inside turn plz relpy to this matter befor i decide to brake it up
hhaarryy3 years ago
i like the idea but it opens even without the right combination i have gone through the instructions many times and i have got it right but ....... i like it :P
Torpe3 years ago
Works great! Kinda hard to follow the instructions, but easy enough. Showed it to all my friends, they were amazed by it! Great build, and fun to play around with. 5*, fave, and sub. Loved it!!!!!
gcg4193 years ago
Can u add a pice count??
i made this and added 18 layrs of rods.
then tried to smash and jump on neather broke it !!!!
18!!! Could you upload a picture?
today were gonna run it over !!!! :)
yea i can.
next imgonna run it over
cholden3 years ago
have you fixed the hinge problem cause it can allow you to take the door cause ive fixed it
Yep, and the normal walls on the safe have gaps but on mine there is no gaps.
good at least the door cant come of
cholden3 years ago
this is a great desighn i modified mine to have a stand
LudwigKnex4 years ago
lol what is that dodododado sound in the back ground in the video?
slithien (author)  LudwigKnex4 years ago
I realy dont know...
LudwigKnex4 years ago
Okay, Now that youve built the tumbler,... how do you figure out the code?
simple yet effective but i wouldnt keep my money in it. 5*
shieldsam4 years ago
dude this sucks, can u post some pics of the white rods that stick out of the bits o the grey rod with the wheel? untill then, 0.5*
slithien (author)  shieldsam4 years ago
If you mean the white rods that stick out of the squares that spin, then place them where you want on the white connecter. Your code will be depend on where you place them. If this doesnt help then comment me back. I wont upload more photos because my laptop got taken away from me and everyone else managed to build it fine.
what is the combo two open it
slithien (author)  superbestknex4 years ago
The code depends on where you place the white rods on the square things.
how long did it take you to load
What will happen if i spin it randomly :P will it still click into place ??
what is the combo
slithien (author)  xXFor_The_WinXx4 years ago
No, if you spin it randomly, when you push the button it will be blocked by the sguare things
salomon19964 years ago
i think you have the same knex i have! the big ball machine, right? nice instructable!
slithien (author)  salomon19964 years ago
Umm... Do you mean the big ball factory if so i have that but i also have about 11 other boxes. And i got them all of ebay!!!
1-40 of 121Next »