With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
I made this instructable because I needed a way to drive multiple axles in sync for another instructable I am making. Unlike some makers I have no access ...
First, you need to cut a square out of the wood. This square should be 2.5 in x 2.5 in. Make sure it is as close as possible ...
This is where precision really starts to matter. Measure 3/4 from a corner of the square on both edges, then cut from point to point. Repeat that for ...
Here is where you will use your drill/drill press and 3/4 inch drill bit. Take your octagon, clamp it down tightly and drill straight down centering your drill ...
With your file or sand paper, round off the teeth on your sprocket. After that, your sprocket is done. This picture is a perfect example of what happens ...
In order to actually use a sprocket, you need a belt. You can make a belt out of almost anything, the only thing you need to know is ...
I used a computer to produce a prototype because I was not sure that my idea would actually work. I needed to see if the octagon would actually ...
Since I have entered this into the make it challenge I feel that i should say what I would do with a 3d printer. I often find myself ...
Plasma Sprocketsby EV Builder
Simple Guide to Making Sprocketsby ajrenzetti
wooden robotic hexapodby protolabs
Building a CNC routerby Benne
Gear Coastersby spike3579
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »