With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
A simple construction of HAL 9000 from 2001 A Space Odyssey
What i used for this i found in my house, but i do have an unusual house so some of these pieces you might have to get creative ...
I soldered one wire to the LED and the other to a switch that dims it,but you can make one that completely turns it off or just wire ...
I used the skinniest part of the box and traced the can on to the box a little lower than half way.
I used a pen to be a holder for the marble at one end and the LED at the other.-before you tape the marble on put the pen ...
-first paint the ziploc box black.just the box-Next put the can in the box and push it through the hole so that the outer lip of the can ...
you can optionally add a lense or some clear plastic in front. thats what i did.
HAL 9000 - Analog Bulletin Boardby caitlinsdad
RaspberryPI HAL9000 by ArtBIT
The Peep-Hal: A Peephole sized HAL-9000by pjensen
HAL 9000 computer/robotby BOT4
Homemade HAL9000by joe
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.