loading
plans for a basic "funbox" that will improve your skateboarding. i have built many boxes in my life and have found this to be the most flexible and useful design.

please note that the 3D CAD images have 5 support studs where as the actual construction had 6. I decided it was better to have the extra one. I recommend it to you as well.

Step 1: Supplies

Picture of Supplies
2 - 2" x 12" x 6' pressure treated wood. (i used PT since these pieces might get wet)
6 - 2" x 4" x 3' douglas fir.
3 - 2" x 4" x 2' douglas fir.
1 - 2" x 4" x 6' douglas fir.
1 - 6' x 39" x 5/8" plywood.
1 - 1" x 2" x 6' douglas fir.
3 - 1 1/2" x 1 1/2" x 6' slotted steel angle rods

screws, grill, saw, etc.
 
andyoaryoga4 years ago
considering this design, isn't it would better if using a metal rail, an iron rail ? it's stronger though ?
dinglballs4 years ago
that thing must be heavy as hell. i have an 8 foot long box and what i did was cut 12 inches off both sides of a full sheet of plywood and fold them down as the sides, then put like 4 or 5 struts inside of it and mine is unliftable. how do you move that thing?
dingu66665 years ago
hey you could build a tech deck fun box using the same method but use ply wood
thepepper947 years ago
that's awesome.. I was just wondering, how much does it cost?
my estimates come out to about $138.57 depending on tax and your local hardware stores prices.
skinnykidjr5 years ago
im making this for school project
what program did you use to make the models
i used a program at my school. it was a mechanical engineering prog called I-deas src. its a pretty tricky program. I recommend pro engineering over it.
hey do you think you could send me a STEP file of this 3d model. i use auto cad
duude54646 years ago
how much will this come out to in u.s. dollars
chazten7 years ago
What do you mean by a grill? please reply because I really wanna make one of these
rsic chazten6 years ago
he means drill...
jasssss6 years ago
hey can you or somebody tell me how to build the ramp part? and maybe put a price on this? thanks
tom9490 jasssss6 years ago
i just went to friedmans today, i didnt buy everything but it is going to cost 60 bucks mabey less. i didnt check prices on slotted steel angle rods but everything else only costs about 40 bucks. and i guess the kicker would be no more than 40 bucks also-(probably a lot less for the kicker but i bet no more than 40)
tech wiz6 years ago
thats awesome but could you do it in tech deck size
fullylakai6 years ago
Making me one, nice and solid
Teh_Fluff6 years ago
lol my funbox is a wooden pallet covered with a sheet of plywood, and pvc coping
chazten7 years ago
How much did it cost????!!!
how much did it cost, me and my dad have been trying to find a decent funbox plan for under $300
you can build an awsome funbox for under 300$ remember kids 2x6's not 2x4's use pressure treated 3/4 for the rest, studs on 8 inch centers!
hey bro. nice design. i like it alot. but i have a quick question. no instructions on the ramp like in the picture?
adrian.hashizume (author)  enjoiskater167 years ago
The ramp was acutally made out of the remaining wood from the box. Sorry for the delayed response, I was out of the country for a while. I plan on making a different ramp for it. I don't have as much time to skate anymore thou.
NecroWave248 years ago
How much did it cost?
PetervG8 years ago
How about a longboard funbox :D
Visitor PetervG8 years ago
Longboard is the funbox.
Nice Documentation! How about some pics of you ripping up your new funbox?!
i sessed it a few times. i guess i can put some vidz up when i get em.
Sweet!
Cool idea, im not sure if i have the time...