Introduction: Skew'r Shot

Picture of Skew'r Shot

Warning! This is an extremely dangerous weapon.
I'm not responsible for anyone maimed, poked, prodded at range, or otherwise annoyed by this bow.
The Enrichment Center reminds you that the Skew'r shot will never threaten to burn you and, in fact, cannot speak.

Now, On to the instructions!

Step 1: Supplies

Picture of Supplies

you will need:
1 fiberglass kite strut (recycled from a cheap wal-mart kite)
1piece of twine slightly shorter than the fiberglass rod
electrical tape
1 re-usable straw (those novelty straws will work if the inner diameter is less than the thickness of your skewers)
1 elastic band
1 bag of skewers

Step 2: Tie String

Picture of Tie String

use a reef knot (square knot) to tie the string to the rod and tape it tightly

Step 3: Secure Stabilizer

Picture of Secure Stabilizer

using the elastic bind the straw to the elastic as shown

Step 4: Use It

Picture of Use It

stick the skewer in the straw and draw back


NachoMahma (author)2009-06-04

. Good job.

About This Instructable




Bio: I'm a hard core LARPer, i'm working toward my goal of becoming an army ranger (step one drop to below 200lbs)
More by corey_caffeine:My current LARP set upBoffer Warglaivesamtgard hewing spear
Add instructable to: