Instructables
loading
loading
Picture of soda can stove
S7300498.JPG
to make this stove you will need

1. an empty soda can
2. your favorite knife
3. sticks,twigs, and some paper
4. charcoal lighter fluid
 
Remove these adsRemove these ads by Signing Up

Step 1: Cut the top out

Picture of cut the top out
S7300489.JPG
cut the top out

Step 2: Cut holes for air

Picture of cut holes for air
S7300490.JPG
S7300494.JPG
1.make four holes around the can about 1 inch from the bottom
2.enlarge one hole

Step 3:

Picture of
S7300497.JPG
1.punch 8 holes around the top lip of the can
2.than punch 8 more below the holes you just made

Step 4: You finished the stove

Picture of you finished the stove

Step 5: Reminder

Picture of reminder
close or cover your knives when your done this can save you from some accidents

Step 6: Build your fire

Picture of build your fire
S7300499.JPG
S7300501.JPG
S7300503.JPG
1.collect your wood

2.pack the can with wood not too much because the fire wont light

3.spray some lighter fluid on the wood make sure you get the bottom wet

4. light the fire through the enlarged hole